.

This model is a project I wanted to do for a good friend of mine.  I plan to replicate his full-size FD3S RX-7 using the Fujimi kit.  I have several photos of his car for references so wish me luck on this one.  The exterior will be painted the factory blue color like his of course.  The muffler is from Fujimi Grade Up Parts kit.  As with the full-size car, I will try to reproduce it as much as possible.

Aftermarket Parts Used:

• Aoshima Volk Racing CE28N: 116

• Fujimi Grade Up Parts kit: 11052

• SAS

Top

.

This Scale Speed Garage my model car speed shop.  It is comprised of five Fujimi Garage diorama kits, two Fujimi Garage Tools kit, and various parts and accessories from Scale Equipment LTD.  This shop is going to be my background for my current projects.  Since I move approximately every three years, I am setting the diorama up so I can take it apart when it is time to move.

Parts Used:

• Five Fujimi Garage and Tools Garage kit
• Two Fujimi Garage and Tools Tool kit

 The following parts are from Scale Equipment Ltd.:

• Galvanized Trash Cans:
• Sweep Brooms kit number: 25017
• Automotive Jack Stands: 25031
• Droplight: 25086
• Battery Charger: 2533
• Cans and Bottles: 25062
• Product Boxes: 25063
• Smoking/No Smoking Signs: 30004
• Hand Truck: 2538
• Fire/Exit Signs: 30005
• OSHA "Caution/Safety" Signs: 30007
• Utility Cart: 2536
• Repair Ramps: 25009
• File Cabinet: 25049
• Laptop Computer: 25253
• Shop Rags: 2503
• Storage Cabinet: 25023
• Outdoor / Halogen Light Fixture: 25174
• Air To Go: 33006
• Hanging Files: 25049-1
• 16x36x72 Shelves: 25005
• First Aid Box: 25028
• Utility Sink: 25158

 The following parts are from Plastructs:

• Desk w/drawers: OLD-22
• Desk: OLD-32
• 5/8" Light Shade: LF-8
• 3/32" Stanchion Hardware: LF-516
• Desktop Computer: OLM-42

 The following parts are from Mixed Lot Minis:

• Tool Chest

Top

.

I thought I would build this kit because my wife thought the 1:1 was a cute car.  Anyhow, I am spicing this ride up to give a little racer look.  The exterior of the van is covered in Tamiya’s TS-?? Telefonic Blue.  I did the interior in gray with blue accents.  I have replaced the factory seats with a set of Recaro's from Fujimi.  The seats will have seat belts from Modelers.  I have also replaced the factory steering wheel with one from a Fujimi Grade Up Parts Kit.

Aftermarket Parts Used:

• Fujimi 17" Advan TCII wheel: 19238

Top

.

As with the VehiCross I wanted to build something a little different so I bought this kit.

Top

.

This BMW 535i will be built to replicate my wife's 1:1 BMW 535i.

Top

.

This is Fujimi's GC110 Skyline GT-X.  The body needed lots of prep before painting and detailing.  The exterior of the GC110 Skyline GT-X will be covered in Mr. Hobby #1 white.  I started to paint the body yellow then decided to go with white.  The body has since been stripped of the yellow.  The body also had/has a lot of flashing that needed to be removed prior to any painting.  The front lower opening has been opened.  There are also vents in the hood that I plan to open also.  The GT-X is sporting a custom exhaust system with a Fujimi Wagon muffler.  The interior of this Fujimi GC110 Skyline GT-X has a Momo steering wheel from the Fujimi, Detail Master Performance Gauges that have taken the place of the molded gauges in the dashboard.  A set of The Model Car Garage Multimedia Accessory Gauges gauge and bracket, and a set of seatbelts from Modelers will round out the interior.

Aftermarket Parts Used:

• Fujimi Wagon Muffler: 11048

• Detail Master Performance Gauges: DM2303

• The Model Car Garage Multimedia Accessory Gauges and bracket kit: MCG-509

• Modelers Racing Harness: P501-1100

• Detail Master 5" Dia. Tachometer Kit: DM 3220

Top

.

I am not sure as to build this kit stock or modify it.

Aftermarket Parts Used:

• Fujimi 18" Work Design LS Euroline SUV wheels - No. 25

Top